You are here: HOME> ARMS COLLECTION> MUSKETS AND BAYONETS > Sea Service Musket |
Other Sections of Interest: Swords Artillery Helmets and Armour Sword Knots Other Muskets and Bayonets |
Historical Background
As early as 1738, Britain's Admiralty had muskets made specifically for its sailors and Marines. Throughout the next 100 years the sea service musket went through a slow evolution in lock styles, but three elements remained the same: (1) a short barrel, (2) a two ramrod pipes, and (3) a distinctly flat butt plate with a square-cornered butt. This butt shape was completely unique to the sea service musket (see original butt plate).
From 1757, this musket was produced in both a bright finish (shown here) and a blackened or japanned finish. It is likely the bright finish was the distinguishing element of the arms of the Marines (after 1802 "Royal Marines") from that issued to the sailors. Bright arms were a source of pride for Infantry Regiments and considering the infantry-like duties of the Marines, it is likely they possessed the time to maintain the bright finish both at sea and while on service ashore.
Not so for the seamen whose time was better spent in seafaring than polishing. Blackening the barrels of their muskets to protect them from salty sea water was the better option. On some original this blackening was even extended to the brass as well.
Boarding party of sailors and marines, 1801By the time of Nelson, a portion of the crew (example: 150 sailors on a 1st Rate ship) was expected to be well-versed in the musket firing exercise and took turns on board to become efficient in the proper handling of their musket. The Captain only needed to dispatch this portion of the crew to repel enemy boarders. A small well-trained, volley-firing detachment was much more effective than a large mob of sailors firing indiscriminately. In addition, when part of a ship's crew was called upon to fight on shore, they could perform their duty like trained Infantry.
That said all of the crew received basic training in the use of a musket. The ship's Master at Arms was specifically ordered when training the crew "to direct their attention to the pointing of their muskets well before they fire them". (see Regulations and Instructions Relating to His Majesty's Service at Sea (1808) for further information)
Specifications
Reproduced here is the 1778 model of the Sea Service musket. It adopted the 1777 style straight lock at this time. In addition a steel ramrod became standard and a small spring catch as added to the first pipe to keep the rammer from falling out. As you can see no brass nose cap was used on this nor any other model of sea service musket.
After the study of a number of originals, (see an original in Canadian War Museum collection) the presence of a trigger plate seems to be more common then not (see original trigger plate with remnants of blacking on it). The tang screw ends in a small square nut in front of the trigger. This element was adopted into the 3rd model brown bess. The trigger guard is short and quite simple in design and the musket itself was one of manufacturing efficiency than elegance.
The 37 inch .75 calibre barrel is made of tempered seamless modern carbon steel (type:BS970 no.080M40) with a threaded breech plug. Blackened barrels were rough filed to improve bonding of the blackening. The one offered here is the bright steel model but can be easily blackened by the customer.
The lock is made with strong durable springs and has a case-hardened frizzen (hammer) that throws good sparks (our new process of cyanide hardening has made this even more durable). The ramrod has a threaded end and when in the barrel has 1 inch of length past the muzzle for easy handling. We use a cyanide case-hardening factory process that makes sparking both more reliable and longer lasting. Presently no other musket provider uses this technique.
As with all our other flintlocks, the vent is not drilled so we can ship easily to your door throughout North America and to Europe and the UK. Aside from that they are exactly like the originals. A fine addition to any collection.
549.00US (559.00CAN) MTS-022
-- Money-back Guarantee - Shipped to your Door - Lowest Price Commitment -Click on Image Links:
Image 2 Image 3 Image 4 Image 5 Image 6 Image 7
Also Available:
Brown Bess Bayonet for 49.50US (59.00CAN)
Scabbard with GR marking 25.00US (34.00CAN) image
of GR marking
For shipping costs and other details see our Muskets section
Our Guarantee
If upon receiving your musket you are not completely happy with your purchase, you may return it for a refund. All we ask is you cover the shipping costs.
Non-firing State
We sell historically accurate muskets as a non-firing state. This allows us to comply with local, state, national and international firearms regulations. A certified gunsmith may alter this musket to a firing state by drilling the vent hole and test firing it. We are not legally responsible for any alteration from its present non-firing state.
Our Arms Collection section has some free articles relating to this item.
Click Here for FAX/Mail Order Form
Militaryheritage.com Sites:
Seven Years War Website War of 1812 Website Napoleonic Wars Collection
Military Heritage Magazine Military Music Sound Clip Gallery
Home of the Discriminating General
Our Products and
Services:
Our
Mission and Clients Product
Index Heritage
Film Services Seven
Years War Replicas
American Rev Replicas Napoleonic
Wars Replicas French
Nap. Headdress
British Army,1793-1815 British Army, 1816-1856 Military
Buttons Military
Belt Plates
Swords
Sword Knots Military
Drums
Additional Products...
© Copyright: Unless otherwise noted, all information, images, data contained within this website is protected by copyright under international law. Any unauthorized use of material contained here is strictly forbidden. All rights reserved. The Discriminating General is in no way to be held accountable for the use of any content on this website. See Conditions of Use.
